Recompilar MAMP

El soporte de LDAP en MAMP 1.7.1 esta roto asi que tube que recompilar el PHP, lo cual me obligo a recompilar todas sus dependencias, pero como no encontre ninguna guia de como realizarlo correctamente, aqui esta como lo hice yo.

Lo primero es descargarse el codigo fuente proporcionado por la gente de MAMP, y su version compilada.

Codigo fuente: MAMP 1.7.1 (src)

Version Intel: MAMP 1.7.1 (intel)

Version PPC: MAMP 1.7.1 (ppc)

Una vez que tengamos esto, hay que instalar MAMP la version compilada en /Applications y asi ya tenemos toda la estructura correcta lista para solo recompilar lo necesario.

Ahora descomprimimos el codigo fuente y vamos compilando las diferentes librerias:

CURL

tar zxvf curl-7.16.2.tar.gz
cd curl-7.16.2
./configure --prefix=/Applications/MAMP/Library
make
make install

Freetype

tar zxvf freetype-2.3.4.tar.gz
cd freetype-2.3.4
./configure --enable-shared --configure=/Applications/MAMP/Library/
make
make install

Gettext

tar zxvf gettext-0.16.1.tar.gz
cd gettext-0.16.1
./configure --prefix=/Applications/MAMP/Library
make
make install

IMAP (Parche para osx: imap-2006i-osx.patch)

tar zxvf imap-2006i.tar.Z
cd imap-2006i
patch -p1 < imap-2006i-osx.patch
make oxp
cp c-client/*.h /Applications/MAMP/Library/lib/imap-2006i/include/
cp c-client/*.c /Applications/MAMP/Library/lib/imap-2006i/lib/
cp c-client/c-client.a /Applications/MAMP/Library/lib/imap-2006i/lib/libc-client.a

JPEG

tar zxvf jpegsrc.v6b.tar.gz
cd jpeg-6b
./configure --enable-shared --prefix=/Applications/MAMP/Library
ln -s `which glibtool` ./libtool
make
make install

libiconv

tar zxvf libiconv-1.11.tar.gz
cd libiconv-1.11
./configure --enable-shared --prefix=/Applications/MAMP/Library
make
make install

LibIdn

tar xvfz libidn-0.6.14.tar.gz
cd libidn-0.6.14
./configure --enable-shared --prefix=/Applications/MAMP/Library/
make
make install

libmcrypt

tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8
./configure --enable-shared --prefix=/Applications/MAMP/Library/
make
make install

libpng

tar zxvf libpng-1.2.18.tar.gz
cd libpng-1.2.18
./configure --enable-shared --prefix=/Applications/MAMP/Library
make
make install

libxml

tar zxvf libxml2-2.6.29.tar.gz
cd libxml2-2.6.29
./configure --enable-shared --prefix=/Applications/MAMP/Library
make
make install

libxst

tar zxvf libxslt-1.1.21.tar.gz
cd libxslt-1.1.21
./configure --enable-shared --prefix=/Applications/MAMP/Library/ --with-libxml-prefix=/Applications/MAMP/Library/
make
make install

t1lib

tar zxvf t1lib-5.1.1.tar.gz
cd t1lib-5.1.1
./configure --enable-shared --prefix=/Applications/MAMP/Library/
make without_doc
make install

libexpat

Esta libreria es necesaria y no esta incluida, asi que hay que bajarla de http://sourceforge.net/projects/expat/

tar zxvf expat-2.0.1.tar.gz
cd expat-2.0.1
./configure --enable-shared --prefix=/Applications/MAMP/Library/
make
make install

MySQL

tar xvfz mysql-5.0.41.tar.gz
cd mysql-5.0.41
./configure --prefix=/Applications/MAMP/Library --with-unix-socket-path=/Applications/MAMP/tmp/mysql/mysql.sock --with-tcp-port=9999 --localstatedir=/Applications/MAMP/db/mysql/
make
make install

Apache2

tar zxvf httpd-2.0.59.tar.gz
cd httpd-2.0.59
./configure --prefix=/Applications/MAMP/Library --sysconfdir=/Applications/MAMP/conf/apache --enable-nonportable-atomics --enable-so --enable-cgid --enable-auth-anon --enable-auth-dbm --enable-auth-digest --enable-file-cache --enable-echo --enable-charset-lite --enable-cache --enable-disk-cache --enable-mem-cache --enable-example --enable-ext-filter --enable-case-filter --enable-case-filter-in --enable-deflate --enable-mime-magic --enable-cern-meta --enable-expires --enable-headers --enable-usertrack --enable-unique-id --enable-proxy --enable-proxy-connect --enable-proxy-ftp --enable-proxy-http --enable-bucketeer --enable-http --enable-info --enable-cgid --enable-vhost-alias --enable-speling --enable-rewrite --enable-so --with-ssl=/usr --enable-dav --enable-dav-fs --enable-ssl=shared --enable-mods-shared=most --with-mpm=prefork --without-berkeley-db
make

Si al compilar nos aparece este error:

endrecv.c:965:2: error: #error APR has detected sendfile on your system, but nobody has written a
sendrecv.c:966:2: error: #error version of it for APR yet. To get past this, either write apr_sendfile
sendrecv.c:967:2: error: #error or change APR_HAS_SENDFILE in apr.h to 0.

Entonces tenemos que editar el fichero srclib/apr/include/apr.h y cambiar la linea #define APR_HAS_SENDFILE 1 por #define APR_HAS_SENDFILE 0

Y finalmente para instalar

make install

PHP

tar zxvf php-5.2.5.tar.gz
cd php-5.2.5
./configure --with-mysql=/Applications/MAMP/Library --with-apxs2=/Applications/MAMP/Library/bin/apxs --with-gd --with-jpeg-dir=/Applications/MAMP/Library --with-png-dir=/Applications/MAMP/Library --with-zlib --with-freetype-dir=/Applications/MAMP/Library --prefix=/Applications/MAMP/bin/php5 --exec-prefix=/Applications/MAMP/bin/php5 --sysconfdir=/Applications/MAMP/conf/php5 --with-soap --with-config-file-path=/Applications/MAMP/conf/php5 --enable-track-vars --enable-bcmath --enable-ftp --enable-gd-native-ttf --with-bz2=/usr --with-ldap --with-mysqli=/Applications/MAMP/Library/bin/mysql_config --with-sqlite --with-ttf --with-t1lib=/Applications/MAMP/Library --enable-mbstring=all --with-curl=/Applications/MAMP/Library --enable-dbx --enable-sockets --enable-bcmath --with-imap=shared,/Applications/MAMP/Library/lib/imap-2006i --enable-soap --with-kerberos --enable-calendar --with-pgsql=shared,/Applications/MAMP/Library/pg --enable-dbase --enable-exif --with-libxml-dir=/Applications/MAMP/Library --with-gettext=shared,/Applications/MAMP/Library --with-xsl=/Applications/MAMP/Library --with-pdo-mysql=shared,/Applications/MAMP/Library --with-pdo-pgsql=shared,/Applications/MAMP/Library/pg --with-mcrypt=shared,/Applications/MAMP/Library --with-openssl --with-iconv=shared,/Applications/MAMP/Library
make
make test
make install

Y con esto ya tenemos recompilado el MAMP y listos para funcionar. En cualquiera de las opciones se puede aprovechar para cambiar opciones, añadir o quitar modules, etc…

3 Comments to “Recompilar MAMP”

  1. Marcos 1 March 2009 at 18:10 #

    Me dan muchos errores del tipo

    configure: warning: –with-mysql=/Applications/MAMP/Library: invalid host type
    configure: warning: –with-apxs2=/Applications/MAMP/Library/bin/apxs: invalid host type

    Reply
  2. Marquitox 1 March 2009 at 18:34 #

    Otro más al intentar compilar mysql

    configure: error: invalid variable name: –prefix

    Reply
  3. P0L0 2 March 2009 at 11:14 #

    Nose porque pero me he fijado que todos los parametros de configuracion salen con un solo “-” y no dos, como deberia ser. Ahora lo estoy revisando, porque cuando edito el articulo sale correcto…

    El error que te da en el mysql, es porque pones “-prefix” con un solo “-” y no “–prefix”, con dos “-”

    Reply

Leave a Reply